These mono power amplifier modules deliver 250W of power at 4Ω. The amplification stage consists of 6 high-quality Toshiba 2SC5200 / 2SA1943 bipolar transistors, while the power supply section includes two ELNA 63V 10000µF capacitors, a Sanken 50A diode bridge (rectifier) and a DIP8-mounted TL072CP dual OPA.
The 3E Audio 260-2-29A PFFB module is a high-performance Class D amplifier that can operate in stereo (BTL) mode. It is based on the use of TPA3255 amplifier chips allowing it to develop an important power of 2x260W under 4Ω.
This 3E Audio 480-1-29A amplifier module is a class-D balanced mono amplifier module based on a TI TPA3255 chip. This module delivers up to 480W into 2 Ohm (@ 1% THD+N, 1kHz) while maintaining premium sound quality.
This Class D amplifier module is based on the use of a TI TPA3255 amplifier chip. This one allows to deliver a comfortable power of 2x160W under 4Ω (1% THD+N) or 2x80W under 8Ω (1% THD+N), and those with an efficiency higher than 90%. The architecture of this chip also allows it to maintain a very low level of distortion over the entire...
This mono amplification module uses a TPA3255 amplification chip, allowing it to develop a substantial power of 1x250W under 4Ω (1% THD + N) while taking advantage of the high efficiency inherent in its Class D architecture.
This small amplifier module embeds two TPA3116D2 chips and is able to deliver up to 2x76W at 8Ω and 2x110W at 4Ω. Its output stage benefits from an LC filtering circuit, allowing a clean and precise sound reproduction. Practical, it also integrates a Bluetooth 5.0 reception chip, allowing you to broadcast your music remotely, from a smartphone for example.
The TDA7850 is a class A/B amplifier module with MOSFET technology, featuring 4 channels and capable of delivering 4x50W output power at 4 ohms. The TDA 7850 chip, mounted on a heatsink for efficient heat dissipation, is the reason for its high power and rich, detailed sound reproduction.
This amplifier module features 6 output channels and is based on 3 TPA3255 chips to deliver an output power of 260W at 4Ω and 150W at 6Ω. This module requires a power supply of 24-48V DC and integrates 3 12V power supply outputs for the fans, as well as an 8.5V auxiliary power supply output.
This high efficiency Class D amplifier module is based on a TI TAS5630 chip, allowing it to develop a high power of 2x 240W under 4Ω (1% THD). This chip is associated with a pair of high-performance OPA1632 AOPs ensuring very low distortion for a clear and detailed reproduction.
This Class D stereo amplifier module is based on an Infineon MA5332 amplifier chip. It can deliver 2x125W at 4 Ohm, or 2x65W at 8 Ohm. For signal input, the module accepts an single-ended stereo RCA input, via two 2-pin PCB connectors.
This Class D stereo amplifier module is based on an Infineon MA5332 amplifier chip. This module has a compact form factor, but develops an output power of up to 2x150W @ 4 Ohm.
This small complete amplifier module is based on a TPA3116D2 amplifier chip. This allows it to deliver a power of 2x25W under 8Ω. In addition, the architecture of this chip allows it to ensure a low level of noise and distortion and high efficiency.
This amplifier module is based on a TPA3116D2 amplifier chip. This allows it to deliver a power of 2x25W under 8Ω. In addition, the architecture of this chip allows it to ensure a low level of noise and distortion, and a high efficiency.
The Arylic Up2Stream Amp 2.1 is a 2.1 channel amplifier with full wireless connectivity. It will allow you to use a subwoofer while enjoying the convenience of audio streaming. It supports WiFi, Bluetooth 5.0, DLNA, UPnP, AirPlay and Spotify Connect. The module's clever and smart design also ensures accurate and detailed sound reproduction.
The Arylic Up2Stream AMP Mono is a small, powerful and versatile amplifier module offering advanced wireless connectivity. The amplifier stage of the module is capable of developing a power of 60W under 4Ω.
The Arylic Up2Stream AMP SUB module allows you to add a subwoofer to your stereo system to enjoy deeper bass. Able to develop a power of 100W, its frequency range is also adjustable from 10Hz to 300Hz.
The Arylic Up2Stream Amp V4 is an extremely practical stereo amplification module. Taking advantage of Bluetooth 5.0 and WiFi connectivity, it allows you to broadcast your music remotely, from a smartphone, a computer or a NAS. Capable of developing a power of 2x50W under 4Ω, the Up2Stream Amp V4 is ideal for the design of a multi-room audio system.
Based on the T-Class architecture of the famous TRIPATH brand, this AUDIOPHONICS amplifier module features high quality reproduction for a very compact product.
This BerryBak BVS26B Bluetooth 5.0 amplifier module incorporates a Class F MIX3901 amplifier chip for output power at 2x6W @ 4Ω and 2x3W @ 8Ω. Audio signal input is via Bluetooth, and output on screw terminal for right and left channels.
This double mono amplifier module offers a very classic design, using proven schematics that marked the glorious 1970s of HiFi. The streamlined schematic offers possibilities of modifications and improvements for experienced amateurs who are familiar with this type of pure Class A schematic. Each module is based on a pair of MJ15025G transistors and...
This Class D amplifier module uses an Infineon MA12070 chip allowing it to deliver 2x55W of power at 4Ω with great efficiency while providing accurate and consistent sound reproduction.
This mono Class D amplifier module with a surprisingly compact form factor - less than 2cm on a side - uses a MAX98357 chip to deliver 3W of power. Its I2S input allows an easy association with a Raspberry Pi or ESP32, allowing for example to design a small portable amplified speaker.
This amplifier module is based on an Infineon MA1270 Class D amplifier chip. It uses two power half-bridges with 4 MOSFETs where each transistor is driven by its own separate PWM signal. This highly efficient circuit offers remarkable performance while maintaining a very compact form-factor.
This Class D stereo amplifier module is equipped with a TPA3250 chip allowing it to deliver 2x100W of power at 4Ω, and this with high efficiency. A chip that also takes advantage of the PurePath™ Ultra-HD architecture, ensuring a very low level of distortion over the entire frequency range for a precise, detailed and clear sound reproduction.
This Connex kit, comprising a 500W Class D CxD500 Mono amplifier rated at 4 ohms and its switch-mode power supply (SMPS), gives you a solid base for all your powerful amplification needs. Based on the IR2092S controller and IRFB4227 MOSFET transistors, this amplifier delivers impressive power in a compact package.
The Connex IRS2092 stereo amplifier module incorporates all the necessary circuitry to build a complete Class D amplifier. The module is based on a duo of Infineon (International Rectifier) IRS2092 chips, allowing it to develop a power of 2x700W under 8Ω or 2x370W under 8Ω, with great precision and richness of sound.
The Connex IRS2200SMPS is a Class D amplifier module with integrated power supply. It is based on two IRS2092S chips (one per channel) to deliver a power of 2x200W under 4Ω (THD < 0.1%) or 2x115W under 8Ω (THD < 0.1%), with a high efficiency of more than 94%.
The Connex IRS2200SMPS is a Class D amplifier module with integrated power supply. It is based on two IRS2092S chips (one per channel) to deliver a power of 2x200W under 4Ω (THD < 0.1%) or 2x115W under 8Ω (THD < 0.1%), with a high efficiency of more than 94%.
The Connex IRS2400SMPS is a Class D amplifier module with integrated power supply. The amplifier stage is based on an IRS2092S controller, delivering a power of 2x 400W at 4Ω (THD < 0.1%) and 2x 225W at 8Ω (THD < 0.1%) with a high efficiency of more than 94%.
The Connex IRS2600SMPS amplifier module is a powerful Class D stereo module based on the IRS2092S amplifier controller. This high-performance module is capable of delivering 2x 600W at 4 ohms (THD+N<1%) and 2x 350W at 8 ohms (THD+N<1%), all with an efficiency of over 94%.
The module TDA8954SMPSv2 from Connex is a Class D amplifier based on the TDA8954 amplifier chip. This one is able to deliver not less than 2x170W under 4Ω or 2x90 under 8Ω. Mounted in BTL (bridge), the output power is 340W at 8Ω.
Pre-drilled control panel for KAB / JAB. No welding needed. Comes with all the cables / elements required to enjoy all your JAB / KAB amplification module functions. Professional rendering and easy to assemble.
The Dayton Audio SBA302-BT Soundbar Amplifier Kit makes it easy to design your own modern soundbar. With separate input/amplifier, control and infrared receiver modules, you can create a custom sound bar with all the features common to models on the market.
This intelligent voice module embeds a sub-section I/O trigger, UART and ONE_LINE single bus serial port control. A 5W Class D amplifier circuit is integrated and can directly drive a 3~5W speaker at 4Ω. The module supports MP3 and WAV formats. Its Micro SD slot accepts cards up to 32GB. A Micro USB port allows you to simply power the contents of...