The iEast AMP80 V2 is a versatile, high-performance Class D connected amplifier. It's based on a TDA7498E amplifier chip and an ESS ES9023 DAC chip, enabling it to support up to 24bit 192kHz and deliver up to 2x80W of power under a 4 ohm load. This compact little gem of technology supports WiFi, Ethernet and Bluetooth 5.0 (SBC) connections, so you can...
With the Robin, Moondrop presents wireless in-ear monitors developed in collaboration with the game Honkai: Star Rail. These are based on a pair of drivers combining dynamic and planar magnetic technology to provide effective coverage of the entire frequency band. The Robin have been designed to be extremely ergonomic, with a shape that makes them...
Viablue's 24k gold-plated T8 banana plug contacts allow you to make your own cables by soldering the contact directly to the conductor. You can also screw these plugs to the body of Viablue T8 banana plugs, allowing you to replace faulty connectors, for example.
Sommercable's Epilogue cables feature two Neutrik XLR connectors, male on one side and female on the other. The cables are of high quality design and are based on four copper conductors with a cross-section of 0.14mm². Each of these conductors is covered with a thin layer of carbon before being wrapped in insulation. This layer of carbon not only...
This LHY Audio 3.3V 1.5A low-noise voltage regulator module uses the recommended integration method of the Analog Devices LT3042 + PNP high-end regulator. This provides near-zero noise voltage regulation and a high output current of 1.5A. It can therefore deliver a pure power supply for DACs, high-precision measuring instruments, noise-sensitive RF...
The 7Hz Artemis39 is a compact portable DAC, equipped with an ESS ES9039Q2M chip offering rich, detailed sound and supporting high-resolution audio streams up to PCM 32bit 384kHz and DSD256. What's more, this DAC ensures low power consumption, which combined with an 1100mAh battery, provides comfortable autonomy with up to 10 hours of continuous playback.
LAiV Audio Harmony GaNM power amplifiers represent excellence in power amplification, coming in the form of two mono blocks exploiting gallium nitride (GaN) transistors for 200W of amplification at 8Ω per block, offering uncompromising sound quality. The meticulous attention paid to every aspect of the Harmony GaNM, from its ultra-low-noise power...
The SMSL VMV A1 Pro is an innovative amplifier that uses Gallium Nitride (GaN) transistors to deliver 2x160W of amplification at 4Ω. Its versatility also allows it to operate in pure mono mode, delivering an impressive 400W into 4Ω. Every component of the VMV A1 Pro has been meticulously selected to achieve exceptional audio performance, with...
LAiV Audio Harmony GaNM power amplifiers represent excellence in power amplification, coming in the form of two mono blocks exploiting gallium nitride (GaN) transistors for 200W of amplification at 8Ω per block, offering uncompromising sound quality. The meticulous attention paid to every aspect of the Harmony GaNM, from its ultra-low-noise power...
This IEC C13 Neotech NC-P303II connector will enable you to design your own high-performance cables. It incorporates G-UPOCC composite contacts, a combination of OCC copper and graphene. This new conductor marks a significant advance, both in terms of research and industrial applications. The addition of graphene improves the stability of electrical...
The Keces Ebravo is a versatile audio streamer designed to deliver a high-quality music listening experience. Compatible with many popular streaming services such as Spotify, Tidal and Qobuz, as well as UPnP and DLNA network protocols, it gives you easy access to your favorite music. It can handle audio signals up to PCM 24bit 192kHz. The Ebravo supports...
With the UP6, Shanling presents a portable balanced headphone DAC and amplifier based on two ESS ES9069Q chips and two SGM8262 OPAs to offer conversion up to PCM 32bit 768kHz and DSD512 and an output power of 195mW at 32Ω single-ended and 626mW at 32Ω balanced.
With the UP6, Shanling presents a portable balanced headphone DAC and amplifier based on two ESS ES9069Q chips and two SGM8262 OPAs to offer conversion up to PCM 32bit 768kHz and DSD512 and an output power of 195mW at 32Ω single-ended and 626mW at 32Ω balanced.
The WiiM Vibelink Amp, marks the brand's first foray into non-connected integrated amplifiers, designed to pair with WiiM Mini, WiiM Pro, WiiM Pro+ and WiiM Ultra streamers. This audiophile amplifier integrates an ES9039Q2M DAC chip, a TI TPA3255 amplifier chip and six OPA1612 OPAs, all within a PFFB (Post-Filter Feedback) structure.
The WiiM Vibelink Amp, marks the brand's first foray into non-connected integrated amplifiers, designed to pair with WiiM Mini, WiiM Pro, WiiM Pro+ and WiiM Ultra streamers. This audiophile amplifier integrates an ES9039Q2M DAC chip, a TI TPA3255 amplifier chip and six OPA1612 OPAs, all within a PFFB (Post-Filter Feedback) structure.
With this Audiophonics cable, we offer you a 3.2m shielded mains cable assembled by hand in our workshops in France. It is made from shielded Olflex 110CY cable and is made up of three 2.5mm² copper conductors. A braided tinned copper sheath acts as a shield and protects the conductors from electromagnetic interference (EMI / RFI noise). The SHUCKO...
The SMSL PA-X is an innovative amplifier that uses Gallium Nitride (GaN) transistors to offer 2x250W amplification at 4Ω. Its versatility also enables it to operate in pure mono mode, delivering an impressive 500W into 8Ω. Every component of the PA-X has been meticulously selected to achieve outstanding audio performance, with an incredibly...
With the R-28 MK3, Audio-GD has updated its R2R DAC, which doubles as a discrete balanced preamplifier and headphone amplifier. All the qualities of its predecessor are retained, from the ladder resistor network controlled and corrected by FPGA to the symmetrical amplification of the signal by transistors, passing through a very low noise and ultra high...
Kiwi Ears x HBB Punch in-ear monitors feature a 1DD+2BA+2EST design. This configuration delivers impactful bass, balanced mids and extended highs for a rich listening experience across the entire frequency band. Harmony between the different drivers is made possible by a passive 3-way crossover for a coherent, tonally pleasing sound.
Kiwi Ears x HBB Punch in-ear monitors feature a 1DD+2BA+2EST design. This configuration delivers impactful bass, balanced mids and extended highs for a rich listening experience across the entire frequency band. Harmony between the different drivers is made possible by a passive 3-way crossover for a coherent, tonally pleasing sound.
With the Audiophonics Pulsar DIN 5-pin cable, we offer you a carefully designed cable, using top-quality components and assembled by hand in our workshops in France.
The Kiwi Ears Allegro Pro portable DAC / headphone amplifier is a small device based on the use of two ES9603 headphone amp chips. It supports high-resolution streams up to PCM 32bit 384kHz and DSD128, and is capable of delivering up to 170mW under 32Ω. This means you can enjoy high-resolution files and drive a wide range of headphones and earphones...
The USB-C ddHiFi TC09S cable benefits from a perfectly mastered design, using very high quality components in order to offer excellent conductivity and therefore signal transmission. Thus, its conductors are made of pure silver Litz wire for the data part and OFC copper for the power supply.
The Shanling SMT1.3 is designed for music enthusiasts looking for a high-quality streamer and digital transport. It offers seamless integration with external DACs, guaranteeing faithful, accurate sound reproduction.
The Shanling SMT1.3 is designed for music enthusiasts looking for a high-quality streamer and digital transport. It offers seamless integration with external DACs, guaranteeing faithful, accurate sound reproduction.
The result of a collaboration between ddHiFi and Moondrop, Surface in-ear monitors feature a sophisticated five-driver hybrid system for extended, balanced frequency-band coverage. This configuration combines four Balanced Armature (BA) drivers and one Dynamic Driver (DD), orchestrated by Moondrop's expertise in crossover design, to deliver a natural...
The BC120S cable from ddHiFi has a silver-plated OFC copper core using a litz wire structure made up of 30 wires of 0.10mm diameter coupled with a shield, also made of litz wire of 116 wires of 0.05mm. This 4.4mm Jack to 0.78mm CIEM terminated cable guarantees you an unaltered signal, enhancing the performance of your earphones.
With the TC44PRO M3, ddHifi presents a portable DAC based on two CS43198 DAC chips from Cirrus Logic with a sleek design and a 3.5mm and 4.4mm jack output. This small portable DAC is capable of handling a signal up to PCM 32bit 384kHz and DSD256, and is designed to accompany you wherever you go and adapt to any situation.
The BC44NET cable from ddHiFi is fitted with gold-plated 4.4mm jack connectors on both ends to provide foolproof protection against corrosion and oxidation. At 15cm long, it's ideal for short interconnects, such as connecting a DAP.
With the EM-01, Eversolo presents an omnidirectional electret microphone specially developed to work with Eversolo streamers for acoustic calibration of the listening environment. However, the very good performance of this microphone also makes it an excellent tool in a much wider range of situations, from studio recording to broadcasting.
The Audio-Technica ATH-S300BT headphones, big brother of the ATH-S220BT, are closed, dynamic wireless headphones whose main strength lies in their 90-hour battery life, without sacrificing the quality of the sound they deliver. In fact, a Ø40mm transducer delivers clear, immersive sound for a qualitative listening experience, whether musical or...
The Audio-Technica ATH-AD500X are dynamic open-air headphones featuring no less than Ø53mm drivers for clear, immersive sound reproduction. These headphones offer powerful midrange and low-frequency reproduction thanks to CCAW coils developed by Audio-Technica.
The DAX88 lets you connect up to eight control keyboards per device. With the DAX88HUB, you can connect all your keyboards to the DAX88 with a single Ethernet connection.
With the DKT4X25AB, Wondom offers a DIY kit to assemble a 4x25W Class AB amplifier module yourself. Designed with a TDA7569BLV chip, this kit offers an output of 25W per channel at 4Ω and has been designed for use as a car radio amplifier. Equipped with a robust heatsink, the DKT4X25AB benefits from an optimal cooling design for increased durability...
This protective leather case has been specially designed to provide effective protection for the Shanling UP6 DAC, while allowing convenient access to all the device's controls.
This protective leather case has been specially designed to provide effective protection for the Shanling UP6 DAC, while allowing convenient access to all the device's controls.
Viablue SC-6 AIR jumpers provide an optmale connection between the terminals of your bi-wirable speakers. Designed with AIR technology, these jumpers guarantee interference- and loss-free signal transmission, providing natural, dynamic sound reproduction.
The Kiwi Ears Allegro Mini portable DAC / headphone amplifier is a small device that can support high-resolution streams up to PCM 32bit 384kHz and DSD128, and is capable of delivering up to 30mW under 32Ω. This means you can enjoy high-resolution files and drive a wide range of headphones and earphones available on the market.
With the Audiophonics Pulsar DIN 5-pin cable, we offer you a carefully designed cable, using top-quality components and assembled by hand in our workshops in France.
Danville Signal's dspNexus is a state-of-the-art digital audio processor (DSP), designed to serve as a versatile control center in modern audio systems. It incorporates advanced features to optimize sound quality and audio source management. Thanks to its advanced DSP technologies and high-precision data converters, the dspNexus offers outstanding sound...