New Customer?
Create your accountNo products
Prices are tax included
By buying this product you get 1 loyalty point
Speaker Driver Tweeter Neodymium 20W 4 Ohm 90dB 2500Hz-20kHz
Dayton Audio's ND25FN-4 is a versatile 2.54cm (1") diameter tweeter for use in DIY applications requiring smooth, clean treble reproduction. The treated silk dome diaphragm provides excellent detail and smoothness, while the high-resistance neodymium magnet provides high efficiency in an extremely compact size. The rear-mounted heatsink and ferrofluid-filled magnetic air gap provide enhanced heat dissipation for reduced power compression at high levels. This model is ideally suited for installation within a horn (waveguide) or on a custom mounting plate.
Specifications | |
---|---|
Product type | Speaker driver |
Speaker driver type | Tweeter |
Nominal diameter | Ø2.54cm (1") |
Cone material | Silk dome |
Power handling | 20W RMS |
Impedance | 4Ω |
Frequency response | 2500Hz - 20kHz |
Sensitivity | 90dB 2.83V/1m |
Weight | 59g |
Thiele-Small Parameters | |
---|---|
Resonant frequency (Fs) | 1350Hz |
DC Resistance (Re) | 3.2Ω |
Voice coil inductance (Le) | 0.04mH |
Mechanical quality coefficient (Qms) | 3.87 |
Electrical quality coefficient (Qes) | 2.61 |
Total quality coefficient | 1.56 |
Mounting informations | |
---|---|
External diameter | Ø40.9mm (1.61") |
Depth | Ø21.08mm (0.83") |
Cutout diameter | Ø34.04mm |
Speaker Power (W RMS) | 20.0 |
Speaker Type | Dome tweeter |
Impedance (Ω) | 4 |
Loudspeaker diameter (mm) | 25.0 |
Diaphragm type | Silk |
Efficiency / Sensitivity (dB) | 90.0 |
Max Linear Excursion (Xmax) (mm) | N/A |
Lowest frequency (Hz) | 2500 |
Highest frequency (Hz) | 20000 |