New Customer?
Create your accountNo products
Prices are tax included
By buying this product you get 49 loyalty points
Speaker Driver Ribbon Tweeter 17W 8 Ohm 95dB 1800Hz - 30kHz (Matched pair)
The Viawave SRT-7 is an SRT diaphragm ribbon tweeter with an overall diameter of 104mm and an impedance of 8Ω. It is based on the design of the GRT-145-8 model, with a modified rear chamber here to achieve a smoother frequency response.
The SRT-7 uses patented SRT (Sealed Ribbon Tweeter) technology to seal the air gap between the ribbon and the magnet poles, using a "U" shaped suspension made of a heat resistant polymer film.
The SRT technology drastically reduces the non-linear distortion of the tweeter and allows it to operate at lower frequencies, while maintaining a beautiful transparency.
By combining this SRT technology with a powerful magnet system, the SRT-7 achieves a unique sensitivity for a 7cm² ribbon, with a measured value of 95dB/w/m over the 4-18kHz bandwidth.
Specifications | |
---|---|
Product type | SRT Ribbon tweeter |
Impedance | 8Ω |
Recommended frequency range | 1800Hz - 30kHz |
Power | RMS : 17W Max : 40W |
Power handling with HF 3000Hz 12dB/oct filter | 150W |
Sensitivity (2.83V, 1m) | 95dB |
Rear chamber resonance | 800Hz |
Ribbon dimensions | 14 x 50 x 0.009mm |
Ribbon surface | 7cm² |
Ribbon mass | 0.018g |
Input high frequency inductance | 0.034mH |
Input DC resistance | 0.06Ω |
Input low frequency inductance | 7mH |
Magnetic gap flux density | 0.65T |
Net weight | 1.32kg |
Speaker Power (W RMS) | 17.0 |
Speaker Type | Ribbon tweeter |
Impedance (Ω) | 8 |
Loudspeaker diameter (mm) | 104 |
Diaphragm type | N/A |
Efficiency / Sensitivity (dB) | 95.0 |
Max Linear Excursion (Xmax) (mm) | N/A |
Lowest frequency (Hz) | 1800 |
Highest frequency (Hz) | 30000 |