New Customer?
Create your accountNo products
Prices are tax included
By buying this product you get 12 loyalty points
Speaker Driver Woofer Aluminum 100W 8Ω 90dB 29Hz - 6000Hz Ø8cm 31Hz-2500Hz Ø25.4cm
Dayton Audio's Designer Series was developed specifically for speaker designers. It is a line of affordable loudspeakers with an emphasis on performance. Careful engineering ensures that each driver is capable of handling full power handling at the lowest possible frequencies, without exceeding linear excursion capabilities.
This DSA270-8 uses a low distortion motor, combined with an aluminum diaphragm and a rubber surround. It offers very good performance over its entire frequency range and allows for a large linear excursion. It will fit into many speaker designs.
Specifications | |
---|---|
Speaker driver type | Subwoofer |
Rated diameter | Ø254mm (10") |
Power handling | RMS : 100W Max : 200W |
Impedance | 8Ω |
Frequency response | 29Hz - 6000Hz |
Sensitivity | 90.4dB @ 1W/1m |
Voice coil diameter | Ø38.5mm |
Weight | - |
Overall outside dimensions | Ø216 x 95mm |
Magnet weight | 1.758kg |
Thiele-Small Parameters | |
---|---|
Resonant frequency (fS) | 29.6Hz |
DC Resistance (RE) | 5.4Ω |
Voice coil inductance (LE) | 1.07mH |
Mechanical quality factor (QMS) | 2.09 |
Electrical quality factor (QES) | 0.47 |
Total quality factor (QTS) | 0.39 |
Suspension equivalent air volume (VAS) | 88.1L |
Suspension mechanical compliance (CMS) | 490µm/N |
Force factor (B·l) | 11.2T·m |
Suspension mechanical resistance (RMS) | 5.3N·s/m |
Moving mass including airload (MMS) | 59.6g |
Moving mass (MMD) | 54.7g |
Maximum linear excursion (XMAX) | ±5.5mm |
Displacement volume at Xmax (VD) | 194.2cm³ |
Efficiency (η₀) | 0.48% |
Efficiency bandwidth product (EBP) | 63 |
Surface de la membrane (SD) | 353cm² |
Materials | |
---|---|
Diaphragm material | Aluminum |
Surround | Rubber |
Voice coil wire | Copper |
Voice coil former | Aluminum |
Frame | Steel |
Magnet | Ferrite |
Mounting informations | |
---|---|
Overall outside diameter | Ø270mm |
Cutout diameter | Ø227mm |
Depth | 112mm |
Bolt circle diameter | Ø260mm |
Number of mounting holes | 5 |
Optimum cabinet size (Measured with BassBox 6 Pro) | |
---|---|
Sealed volume | 28.03L (0.99ft³) |
Sealed F3 | 60Hz |
Vented volume | 66.83L (2.36ft³) |
Vented F3 | 33Hz |
Speaker Power (W RMS) | 100.0 |
Speaker Type | Woofer |
Impedance (Ω) | 8 |
Loudspeaker diameter (mm) | 254.0 |
Diaphragm type | Aluminium |
Efficiency / Sensitivity (dB) | 90.0 |
Max Linear Excursion (Xmax) (mm) | 5.5 |
Lowest frequency (Hz) | 31 |
Highest frequency (Hz) | 2500 |