New Customer?
Create your accountNo products
Prices are tax included
By buying this product you get 28 loyalty points
Dayton Audio presents its Odeum range of high-end professional speakers. The Pro 12N is a bass/midrange driver with incredible performance. It is based on a careful, intelligent design, enabling it to be installed in demanding systems requiring high power reproduction with fidelity.
The Dayton Audio Pro 12N has a response that matches many horn and tweeter speakers, thanks to its high efficiency in the frequency range of human vocals and the midrange detail of stringed instruments. The speaker's impedance curve makes it easy to combine with a compression driver without straining your power amplifiers.
The Dayton Audio Pro 12N is a 12" bass/midrange driver capable of outperforming the standard woofers of many PA systems. The 400Wrms power limit is achieved thanks to the combination of a neodymium motor, a 3" voice coil with fiberglass support and a copper inductance cap to reduce distortion. A paper cone with M-Roll fabric suspensions provides a neutral, easy-to-tune sound. The peripheral opening keeps the whole system ventilated.
Technical characteristics
Specifications | |
---|---|
Speaker type | Grave |
Nominal diameter | Ø304mm (12") |
Power | RMS : 400W Max : 8000W |
Impedance | 8Ω |
Frequency response | 40Hz - 5600Hz |
Sensitivity | 96.6dB @ 2.83V/1m |
Voice coil diameter | Ø76.2mm (3") |
Weight | 6.5kg |
Overall external dimensions | Ø319*143.7mm |
Magnet weight | - |
Thiele-Small Parameters | |
---|---|
Resonant frequency (fS) | 38Hz |
DC resistance (RE) | 7.5Ω |
Voice coil inductance (LE) | 0.21mH |
Mechanical quality factor (QMS) | 7h15 |
Electromagnetic quality factor (QES) | 0.27 |
Total quality factor (QTS) | 0.26 |
Compliance equivalent volume (VAS) | 127.99L (4.52ft³) |
Mechanical compliance of suspension(CMS) | 0.323mm/N |
Force factor (B·l) | 19.19T·m |
Mechanical resistance (RMS) | - |
Diaphragm mass inc. airload (MMS) | 54.46g |
Moving mass (MMD) | - |
Max linear excursion (XMAX) | 6.75mm |
Volume of air displaced at Xmax (VD) | - |
Efficiency (η₀) | - |
Bandwidth efficiency (EBP) | - |
Surface area of cone (SD) | 494.56cm² |
Material | |
---|---|
Cone | Coated paper |
Surround | Paper |
Voice coil wire | Copper |
Voice coil former | Fiberglass |
Frame | Steel |
Magnet | Neodymium |
Mounting information | |
---|---|
External diameter | Ø304.8mm (12.59") |
Cutout diameter | Ø279.4mm (11.49") |
Depth | 127mm (5.66") |
Mounting bolt diameter | - |
Number of mounting holes | 8 |
Recommanded CASE SIZE | |
---|---|
Sealed volume | 22.65L (0.8pi³) |
Sealed F3 | 128Hz |
Vented volume | 25.48L (0.9pi³) |
Vented F3 Bass-reflex | 77Hz |
Speaker Power (W RMS) | 400.0 |
Speaker Type | Woofer |
Speaker Type | Midbass |
Impedance (Ω) | 8 |
Loudspeaker diameter (mm) | 305.0 |
Diaphragm type | Paper |
Efficiency / Sensitivity (dB) | 96.0 |
Max Linear Excursion (Xmax) (mm) | 6.75 |
Lowest frequency (Hz) | 40 |
Highest frequency (Hz) | 56000 |